Category Archives: Emerging Threats

Quick Look at Ransomware Content

Posted on by
Reply

Ransomware certainly is a hot topic in information security these days. I thought I would take a few moments and look at some of the content out there about it. Here are some quick and semi-random thoughts on the what I saw.

  • It very difficult to find an article on ransomware that scores higher than 55% on objectivity. Lots of marketing going on out there.
  • I used the new “Teardown” rapid learning tool I built to analyze 50 of the highest ranked articles on ransomware. Most of that content is marketing, even from vendors not associated with information security or security in general. Lots of product and service suggestive selling going on…
  • Most common tip? Have good and frequent backups. It helps if you make sure they restore properly.
  • Most effective tip, IMHO? Have strong egress controls. It helps if you have detective controls and process that are functional & effective.
  • Worst ransomware tip from the sample? Use a registry hack across all Windows machines to prevent VBS execution. PS – Things might break…

Overall, it is clear that tons of vendors are using ransomware and WannaCry as a marketing bandwagon. That should make you very suspicious of things you read, especially those that seem vendor or product specific. If you need a set of good information to use to present ransomware to your board or management team, I thought the Wikipedia article here was pretty decent information. Pay attention to where you get your information from, and until next time, stay safe out there!

Introducing AirWasp from MSI!

Posted on by
9

NewImage

For over a decade, HoneyPoint has been proving that passive detection works like a charm. Our users have successfully identified millions of scans, probes and malware infections by simply putting “fake stuff” in their networks, industrial control environments and other strategic locations. 

 

Attackers have taken the bait too; giving HoneyPoint users rapid detection of malicious activity AND the threat intelligence they need to shut down the attacker and isolate them from other network assets.

 

HoneyPoint users have been asking us about manageable ways to detect and monitor for new WiFi networks and we’ve come up with a solution. They wanted something distributed and effective, yet easy to use and affordable. They wanted a tool that would follow the same high signal, low noise detection approach that they brag about from their HoneyPoint deployments. That’s exactly what AirWasp does.

 

We created AirWasp to answer these WiFi detection needs. AirWasp scans for and profiles WiFi access points from affordable deck-of-cards-sized appliances. It alerts on any detected access points through the same HoneyPoint Console in use today, minimizing new cost and management overhead. It also includes traditional HoneyPoints on the same hardware to help secure the wired network too!

 

Plus, our self-tuning white list approach means you are only alerted once a new access point is detected – virtually eliminating the noise of ongoing monitoring. 

 

Just drop the appliance into your network and forget about it. It’ll be silent, passive and vigilant until the day comes when it has something urgent for you to act upon. No noise, just detection when you need it most.

 

Use Cases:

 

  • Monitor multiple remote sites and even employee home networks for new Wifi access points, especially those configured to trick users
  • Inventory site WiFi footprints from a central location by rotating the appliance between sites periodically
  • Detect scans, probes and worms targeting your systems using our acclaimed HoneyPoint detection and black hole techniques
  • Eliminate monitoring hassles with our integration capabilities to open tickets, send data to the SIEM, disable switch ports or blacklist hosts using your existing enterprise products and workflows

More Information

 

To learn how to bring the power and flexibility of HoneyPoint and AirWasp to your network, simply contact us via email (info@microsolved.com) or phone (614) 351-1237.


 

We can’t wait to help you protect your network, data and users!


Yahoo Claims of Nation State Attackers are Refuted

Posted on by
5

A security vendor claims that the Yahoo breach was performed by criminals and not a nation state.

This is yet more evidence that in many cases, focusing on the who is the wrong approach. Instead of trying to identify a specific set of attacker identities, organizations should focus on the what and how. This is far more productive, in most cases.

If, down the road, as a part of recovery, the who matters to some extent (for example, if you are trying to establish a loss impact or if you are trying to create economic defenses against the conversion of your stolen data), then might focus on the who at that point. But, even then, performing a spectrum analysis of potential attackers, based on risk assessment is far more likely to produce results that are meaningful for your efforts. 

Attribution is often very difficult and can be quite misleading. Effective incident response should clearly focus on the what and how, so as to best minimize impacts and ensure mitigation. Clues accumulated around the who at this stage should be archived for later analysis during recovery. Obviously, this data should be handled and stored carefully, but nonetheless, that data shouldn’t derail or delay the investigation and mitigation work in nearly every case.

How does your organization handle the who evidence in an incident? Let us know on Twitter (@microsolved) and we will share the high points in a future post.

Pay Attention to Egress Anomalies on Weekends

Posted on by
6

Just a quick note to pay careful attention to egress anomalies when the majority of your employees are not likely to be using the network. Most organizations, even those that are 24/7, experience reduced network egress to the Internet during nights and weekends. This is the perfect time to look for anomalies and to take advantage of the reduced traffic levels to perform deeper analysis such as a traffic level monitoring, average session/connection sizes, anomalies in levels of blocked egress ports, new and never before seen DNS resolutions, etc. 

If you can baseline traffic, even using something abstract like net flow, you may find some amazing stuff. Check it out! 

Password Breach Mining is a Major Threat on the Horizon

Posted on by
3

Just a quick note today to get you thinking about a very big issue that is just over the security horizon.

As machine learning capabilities grow rapidly and mass storage pricing drops to close to zero, we will see a collision that will easily benefit common criminals. That is, they will begin to apply machine learning correlation and prediction capabilities to breach data – particularly passwords, in my opinion.

Millions of passwords are often breached at a time these days. Compiling these stolen password is quite easy, and with each added set, the idea of tracking and tracing individual users and their password selection patterns becomes trivial. Learning systems could be used to turn that raw data into insights about particular user patterns. For example, if a user continually creates passwords based on a season and a number (ex: Summer16) and several breaches show that same pattern as being associated with that particular user (ex: Summer16 on one site, Autumn12 on another and so on…) then the criminals can use prediction algorithms to create a custom dictionary to target that user. The dictionary set will be concise and is likely to be highly effective.

Hopefully, we have been teaching users not to use the same password in multiple locations – but a quick review of breach data sets show that these patterns are common. I believe they may well become the next evolution of bad password choices.

Now might be the time to add this to your awareness programs. Talk to users about password randomization, password vaults and the impacts that machine learning and AI are likely to have on crime. If we can change user behavior today, we may be able to prevent the breaches of tomorrow!

From Dark Net Research to Real World Safety Issue

Posted on by
4

On a recent engagement by the MSI Intelligence team, our client had us researching the dark net to discover threats against their global brands. This is a normal and methodology-driven process for the team and the TigerTrax™ platform has been optimized for this work for several years.

We’ve seen plenty of physical threats against clients before. In particular, our threat intelligence and brand monitoring services for professional sports teams have identified several significant threats of violence in the last few years. Unfortunately, this is much more common for high visibility brands and organizations than you might otherwise assume.

In this particular instance, conversations were flagged by TigerTrax from underground forums that were discussing physical attacks against the particular brand. The descriptions were detailed, politically motivated and threatened harm to employees and potentially the public. We immediately reported the issue and provided the captured data to the client. The client reviewed the conversations and correlated them with other physical security occurrences that had been reported by their employees. In today’s world, such threats require vigilant attention and a rapid response.

In this case, the client was able to turn our identified data into insights by using it to gain context from their internal security issue reporting system. From those insights, they were able to quickly launch an awareness campaign for their employees in the areas identified, report the issue to localized law enforcement and invest in additional fire and safety controls for their locations. We may never know if these efforts were truly effective, but if they prevented even a single occurrence of violence or saved a single human life, then that is a strong victory.

Security is often about working against things so that they don’t happen – making it abstract, sometimes frustrating and difficult to explain to some audiences. But, when you can act on binary data as intelligence and use it to prevent violence in the kinetic world, that is the highest of security goals! That is the reason we built TigerTrax and offer the types of intelligence services we do to mature organizations. We believe that insights like these can make a difference and we are proud to help our clients achieve them.

3 Reasons You Need Customized Threat Intelligence

Posted on by
5

Many clients have been asking us about our customized threat intelligence services and how to best use the data that we can provide.

1. Using HoneyPoint™, we can deploy fake systems and applications, both internally and in key external situations that allow you to generate real-time, specific to your organization, indicators of compromise (IoC) data – including a wide variety of threat source information for blacklisting, baseline metrics to make it easy to measure changes in the levels of threat actions against your organization up to the moment, and a wide variety of scenarios for application and attack surface hardening.

2. Our SilentTiger™ passive assessments, can help you provide a wider lens for vulnerability assessment visibility than your perimeter, specifically. It can be used to assess, either single instance or ongoing, the security posture of locations where your brand is extended to business partners, cloud providers, supply chain vendors, critical dependency API and data flows and other systems well beyond your perimeter. Since the testing is passive, you don’t need permission, contract language or control of the systems being assessed. You can get the data in a stable, familiar format – very similar to vulnerability scanning reports or via customized data feeds into your SEIM/GRC/Ticketing tools or the like. This means you can be more vigilant against more attack surfaces without more effort and more resources.

3. Our customized TigerTrax™ Targeted Threat Intelligence (TTI) offerings can be used for brand specific monitoring around the world, answering specific research questions based on industry / geographic / demographic / psychographic profiles or even products / patents or economic threat research. If you want to know how your brand is being perceived, discussed or threatened around the world, this service can provide that either as a one-time deliverable, or as an ongoing periodic service. If you want our intelligence analysts to look at industry trends, fraud, underground economics, changing activist or attacker tactics and the way they collide with your industry or organization – this is the service that can provide that data to you in a clear and concise manner that lets you take real-world actions.

We have been offering many of these services to select clients for the last several years. Only recently have we decided to offer them to our wider client and reader base. If you’d like to learn how others are using the data or how they are actively hardening their environments and operations based on real-world data and trends, let us know. We’d love to discuss it with you! 

Sometimes, It Happens…

Posted on by
4

Sometimes things fail in interesting ways. Sometimes they fail in dangerous ways. Occasionally, things fail in ways that you simply can’t predict and that are astounding.

In a recent assessment of a consumer device in our lab, we found the usual host of vulnerabilities that we have come to expect in Internet of Things (IoT) devices. But, while testing this particular device, which is also tied to a cloud offering for backup and centralization of data – I never would have predicted that a local device would have a full bi-directional trust with a virtual instance in the cloud.

Popping the local device was easy. It had an easy to compromise “hidden” TCP port for telnet. It took my brute force tool only moments to find a default login and password credential set. That’s pretty usual with IoT devices.

But, once I started poking around inside the device, it quickly became apparent that the device configuration was such that it tried to stay continually connected to a VM instance in the “cloud storage and synchronization” environment associated with the device and vendor. How strong was the trust? The local device had mount points on the remote machine and both systems had full trust to each other via a telnet connection. From the local machine, simply telnet to the remote machine on the right port, and without credential check, you have a shell inside the cloud. Not good…

But, as clear of a failure as the scenario above was, the rabbit hole went deeper. From the cloud VM, you could see thousands of other VMs in the hosted cloud environment. Connect from the VM to another, and you need the default credentials again, but, no sweat, they work and work and work…

So, from brute force compromise of a local piece of consumer hardware to a compromise of thousands of cloud instance VMs in less than 30 minutes. Ugh… 

Oh yeah, remember that storage centralization thing? Yep, default credentials will easily let you look through the centralized files on all those cloud VMs. Double ugh…

Remember, I said bi-directional? Yes, indeed, a connection from a VM to an end-point IoT device also works with assumed trust, and you get a shell on a device with local network visibility. Now is the time you kinda get sick to your stomach…

These kinds of scenarios are becoming more common as new IoT devices get introduced into our lives. Yes, the manufacturer has been advised, but, closing the holes will take a complete redesign of the product. The moral of this story is to pay careful attention to IoT devices. Ask questions. Audit. Assess. Test. There are a lot of bad security decisions being made out there in the IoT marketplace, especially around consumer products. Buyer beware!

Custom Security and Business Intelligence at Your Fingertips

Posted on by
5

We have decided to bring what has been a service offering to very select clients for the last several years to availability for all of our clients and the public.

For years, several of our clients have been enjoying custom security intelligence driven by the MSI TigerTrax™ analytics platform and our dedicated team of analysts and subject matter experts. The research and analysis work the team has been performing has been focused on agendas like:

  • competitive analysis
  • economic industry scale market analysis
  • consumer behavior, demographic or psychographic profiling
  • organizational human network data flows and relationship mapping
  • gathering data for marketing and sales opportunities on a global scale
  • dark net data raids
  • trend and disruptive technology assessments
  • scalability & DRM techniques
  • piracy and underground market analyses
  • and even assessments of threats against brands, nation-states and multi-national cooperatives

Our team has robust expertise to gather, profile, mine, visualize and analyze public or private data en masse for your organization.

Want customized threat data about your brands, on a global scale, updated monthly with new findings from the public, deep and dark web spaces? We can do that.

Want large amounts of competitive market data gathered, visualized and summarized? We can do that too. 

Need daily briefings on a set of specific trends, geo-locations or products? Our experts are experienced at producing it.

Desire to have entire market segments deconstructed, profiled and researched to find vendors, trends and critical relationships up to 3 levels away from the core processes? We’ve done that now for multiple industries.

How about a customized monthly briefing of industry wide changes, summaries of events and monitoring of specific sets of questions your organization may have around critical topic areas? We have done this for clients across multiple industries.

Basically, if your organization would like to have customized research, analysis and intelligence – and we aren’t talking about lists of indicators of compromises and such – but REAL WORLD operational intelligence for optimizing your products, services or marketing, then we may be able to assist you. If you need a larger world view than the data you have now permits, we may be able to solve that for you. If you need to match your organization’s internal data-driven views with the views of the public or smaller groups of the public, we may be able to turn those efforts into insights.

If any of this sounds interesting and useful, join us for a cup of coffee or a conference call, and let’s talk about your needs and our capabilities. We have been performing these services for years for a select few clients, and are now ready to open these capabilities to a wider audience. To schedule a discussion, drop us a line at info@microsolved.com, hit our website at microsolved.com and click on the request a quote button or give us a call at (614) 351-1237 today. We look forward to talking with you.

Ready for Ransomware?

Posted on by
5

Ransomware is becoming common. We are getting a lot of calls for help with incident response. Here’s a couple of things to think about, in general, around ransomware attacks.

1. Backups are your first line of recovery – just think about making sure they aren’t infected as well, so that you don’t restore infected files

2. Paying the ransom can be hairy – in some cases, paying the ransom could be a crime (think money laundering, banking regulations and the Patriot Act…), plus having a process to pay in bitcoin, even if you wanted to – in the time provided – is often a challenge

3. Some ransomware is recoverable – so check for options

4. Measure business impact – is re-creation of the data viable at a cost less than the cost of paying the ransom, including the work of paying the ransom – sometimes yes… 

5. Can you identify the failed controls that let you get infected? – If so, fix them, if possible.

These are a good place to start. Think about ransomware, your incident response process and current capabilities. Check your backups and have multiple sources. Be prepared instead of panicked.